It’s A good Time To Buy Business Equipment And Other Depreciable Property

There’s good news about the Section 179 depreciation deduction for business property. The election has long provided a tax windfall to businesses, enabling them to claim immediate deductions for qualified assets, instead of taking depreciation deductions over time. And it was increased and expanded by the Tax Cuts and Jobs Act (TCJA).

Even better, the Sec. 179 deduction isn’t the only avenue for immediate tax write-offs for qualified assets. Under the 100% bonus depreciation tax break provided by the TCJA, the entire cost of eligible assets placed in service in 2019 can be written off this year.

Sec. 179 basics

The Sec. 179 deduction applies to tangible personal property such as machinery and equipment purchased for use in a trade or business, and, if the taxpayer elects, qualified real property. It’s generally available on a tax year basis and is subject to a dollar limit.

The annual deduction limit is $1.02 million for tax years beginning in 2019, subject to a phaseout rule. Under the rule, the deduction is phased out (reduced) if more than a specified amount of qualifying property is placed in service during the tax year. The amount is $2.55 million for tax years beginning in 2019. (Note: Different rules apply to heavy SUVs.)

There’s also a taxable income limit. If your taxable business income is less than the dollar limit for that year, the amount for which you can make the election is limited to that taxable income. However, any amount you can’t immediately deduct is carried forward and can be deducted in later years (to the extent permitted by the applicable dollar limit, the phaseout rule, and the taxable income limit).

In addition to significantly increasing the Sec. 179 deduction, the TCJA also expanded the definition of qualifying assets to include depreciable tangible personal property used mainly in the furnishing of lodging, such as furniture and appliances.

The TCJA also expanded the definition of qualified real property to include qualified improvement property and some improvements to nonresidential real property, such as roofs; heating, ventilation and air-conditioning equipment; fire protection and alarm systems; and security systems.

Bonus depreciation basics

With bonus depreciation, businesses are allowed to deduct 100% of the cost of certain assets in the first year, rather than capitalize them on their balance sheets and gradually depreciate them. (Before the TCJA, you could deduct only 50% of the cost of qualified new property.)

This break applies to qualifying assets placed in service between September 28, 2017, and December 31, 2022 (by December 31, 2023, for certain assets with longer production periods and for aircraft). After that, the bonus depreciation percentage is reduced by 20% per year, until it’s fully phased out after 2026 (or after 2027 for certain assets described above).

Bonus depreciation is now allowed for both new and used qualifying assets, which include most categories of tangible depreciable assets other than real estate.

Important: When both 100% first-year bonus depreciation and the Sec. 179 deduction are available for the same asset, it’s generally more advantageous to claim 100% bonus depreciation, because there are no limitations on it.

Maximize eligible purchases

These favorable depreciation deductions will deliver tax-saving benefits to many businesses on their 2019 returns. You need to place qualifying assets in service by December 31. Contact us if you have questions, or you want more information about how your business can get the most out of the deductions.

© 2019

2019 Q2 Tax Calendar: Key Deadlines or Businesses and Other Employers

Here are some of the key tax-related deadlines that apply to businesses and other employers during the second quarter of 2019. Keep in mind that this list isn’t all-inclusive, so there may be additional deadlines that apply to you. Contact us to ensure you’re meeting all applicable deadlines and to learn more about the filing requirements.

April 1

  • File with the IRS if you’re an employer that will electronically file 2018 Form 1097, Form 1098, Form 1099 (other than those with an earlier deadline) and/or Form W-2G.
  • If your employees receive tips and you file electronically, file Form 8027.
  • If you’re an Applicable Large Employer and filing electronically, file Forms 1094-C and 1095-C with the IRS. For all other providers of minimum essential coverage filing electronically, file Forms 1094-B and 1095-B with the IRS.

April 15

  • If you’re a calendar-year corporation, file a 2018 income tax return (Form 1120) or file for an automatic six-month extension (Form 7004) and pay any tax due.
  • Corporations pay the first installment of 2019 estimated income taxes.

April 30

  • Employers report income tax withholding and FICA taxes for the first quarter of 2019 (Form 941) and pay any tax due.

May 10

  • Employers report income tax withholding and FICA taxes for the first quarter of 2019 (Form 941), if you deposited on time and fully paid all of the associated taxes due.

June 17

  • Corporations pay the second installment of 2019 estimated income taxes.

Will Leasing Equipment or Buying It Be More Tax Efficient for Your Business?

Recent changes to federal tax law and accounting rules could affect whether you decide to lease or buy equipment or other fixed assets. Although there’s no universal “right” choice, many businesses that formerly leased assets are now deciding to buy them.

Pros and cons of leasing

From a cash flow perspective, leasing can be more attractive than buying. And leasing does provide some tax benefits: Lease payments generally are tax deductible as “ordinary and necessary” business expenses. (Annual deduction limits may apply.)

Leasing used to be advantageous from a financial reporting standpoint. But new accounting rules that bring leases to the lessee’s balance sheet go into effect in 2020 for calendar-year private companies. So, lease obligations will show up as liabilities, similar to purchased assets that are financed with traditional bank loans.

Leasing also has some potential drawbacks. Over the long run, leasing an asset may cost you more than buying it, and leasing doesn’t provide any buildup of equity. What’s more, you’re generally locked in for the entire lease term. So, you’re obligated to keep making lease payments even if you stop using the equipment. If the lease allows you to opt out before the term expires, you may have to pay an early-termination fee.

Pros and cons of buying

Historically, the primary advantage of buying over leasing has been that you’re free to use the assets as you see fit. But an advantage that has now come to the forefront is that Section 179 expensing and first-year bonus depreciation can provide big tax savings in the first year an asset is placed in service.

These two tax breaks were dramatically enhanced by the Tax Cuts and Jobs Act (TCJA) — enough so that you may be convinced to buy assets that your business might have leased in the past. Many businesses will be able to write off the full cost of most equipment in the year it’s purchased. Any remainder is eligible for regular depreciation deductions over IRS-prescribed schedules.

The primary downside of buying fixed assets is that you’re generally required to pay the full cost upfront or in installments, although the Sec. 179 and bonus depreciation tax benefits are still available for property that’s financed. If you finance a purchase through a bank, a down payment of at least 20% of the cost is usually required. This could tie up funds and affect your credit rating. If you decide to finance fixed asset purchases, be aware that the TCJA limits interest expense deductions (for businesses with more than $25 million in average annual gross receipts) to 30% of adjusted taxable income.

Decision time

When deciding whether to lease or buy a fixed asset, there are a multitude of factors to consider, including tax implications. We can help you determine the approach that best suits your circumstances.

© 2019

The Home Office Deduction: Actual Expenses vs. the Simplified Method

If you run your business from your home or perform certain functions at home that are related to your business, you might be able to claim a home office deduction against your business income on your 2018 income tax return. Thanks to a tax law change back in 2013, there are now two methods for claiming this deduction: the actual expenses method and the simplified method.

Basics of the deduction

In general, you’ll qualify for a home office deduction if part of your home is used “regularly and exclusively” as your principal place of business.

If your home isn’t your principal place of business, you may still be able to deduct home office expenses if 1) you physically meet with patients, clients or customers on your premises, or 2) you use a storage area in your home (or a separate free-standing structure, such as a garage) exclusively and regularly for your business.

Actual expenses

Traditionally, taxpayers have deducted actual expenses when they claim a home office deduction. Deductible home office expenses may include:

  • Direct expenses, such as the cost of painting and carpeting a room used exclusively for business,
  • A proportionate share of indirect expenses, such as mortgage interest, property taxes, utilities, repairs and insurance, and
  • A depreciation allowance.

But keeping track of actual expenses can be time consuming.

The simplified method

Fortunately, there’s a simplified method that’s been available since 2013: You can deduct $5 for each square foot of home office space, up to a maximum total of $1,500.

For example, if you’ve converted a 300-square-foot bedroom to an office you use exclusively and regularly for business, you can write off $1,500 under the simplified method (300 square feet x $5). However, if your business is located in a 600-square-foot finished basement, the deduction will still be only $1,500 because of the cap on the deduction under this method.

As you can see, the cap can make the simplified method less beneficial for larger home office spaces. But even for spaces of 300 square feet or less, taxpayers may qualify for a bigger deduction using the actual expense method. So, tracking your actual expenses can be worth the extra hassle.

Flexibility in filing

When claiming the home office deduction, you’re not locked into a particular method. For instance, you might choose the actual expense method on your 2018 return, use the simplified method when you file your 2019 return next year and then switch back to the actual expense method thereafter. The choice is yours.

Unsure whether you qualify for the home office deduction? Or wondering whether you should deduct actual expenses or use the simplified method? Contact us. We can help you determine what’s right for your specific situation.

© 2019

A Fresh Look at Percentage of Completion Accounting

How do you report revenue and expenses from long-term contracts? Some companies that were required to use the percentage of completion method (PCM) under prior tax law may qualify for an exception that was expanded by the Tax Cuts and Jobs Act (TCJA). This could, in turn, have spillover effects on some companies’ financial statements.

Applying the PCM

Certain businesses — such as homebuilders, real estate developers, engineering firms and creative agencies — routinely enter into contracts that last for more than one calendar year. In general, under accrual-basis accounting, long-term contracts can be reported using either 1) the completed contract method, which records revenues and expenses upon completion of the contract terms, or 2) the PCM, which ties revenue recognition to the incurrence of job costs.

The latter method is generally prescribed by U.S. Generally Accepted Accounting Principles (GAAP), as long as you can make estimates that are “sufficiently dependable.” Under the PCM, the actual costs incurred are compared to expected total costs to estimate percentage complete. Alternatively, the percentage complete may be estimated using an annual completion factor. The application of the PCM is further complicated by job cost allocation policies, change orders and changes in estimates.

In addition to reporting income earlier under the PCM than under the completed contract method, the PCM can affect your balance sheet. If you underbill customers based on the percentage of costs incurred, you’ll report an asset for costs in excess of billings. Conversely, if you overbill based on the costs incurred, you’ll report a liability for billings in excess of costs.

Syncing financial statements and tax records

Starting in 2018, the TCJA modifies Section 451 of the Internal Revenue Code so that a business recognizes revenue for tax purposes no later than when it’s recognized for financial reporting purposes. Under Sec. 451(b), taxpayers that use the accrual method of accounting will meet the “all events test” no later than the taxable year in which the item is taken into account as revenue in a taxpayer’s “applicable financial statement.”

So, if your business uses the PCM for financial reporting purposes, you’ll generally need to follow suit for tax purposes (and vice versa).

In general, for federal income tax purposes, taxable income from long-term contracts is determined under the PCM. However, there’s an exception for smaller companies that enter into contracts to construct or improve real property.

Under the TCJA, for tax years beginning in 2017 and beyond, construction firms with average annual gross receipts of $25 million or less won’t be required to use the PCM for contracts expected to be completed within two years. Before the TCJA, the gross receipts test limit for the small construction contract exception was $10 million.

Got contracts?

Compared to the completed contract method, the PCM is significantly more complicated. But it can provide more current insight into financial performance on long-term contracts, if your estimates are reliable. We can help determine the appropriate method for reporting revenue and expenses, based on the nature of your operations and your company’s size.

© 2018

Could a Cost Segregation Study Help You Accelerate Depreciation Deductions?

Businesses that acquire, construct or substantially improve a building — or did so in previous years — should consider a cost segregation study. It may allow you to accelerate depreciation deductions, thus reducing taxes and boosting cash flow. And the potential benefits are now even greater due to enhancements to certain depreciation-related breaks under the Tax Cuts and Jobs Act (TCJA).

Real property vs. tangible personal property

IRS rules generally allow you to depreciate commercial buildings over 39 years (27½ years for residential properties). Most times, you’ll depreciate a building’s structural components — such as walls, windows, HVAC systems, elevators, plumbing and wiring — along with the building. Personal property — such as equipment, machinery, furniture and fixtures — is eligible for accelerated depreciation, usually over five or seven years. And land improvements — fences, outdoor lighting and parking lots, for example — are depreciable over 15 years.

Too often, businesses allocate all or most of a building’s acquisition or construction costs to real property, overlooking opportunities to allocate costs to shorter-lived personal property or land improvements. In some cases — computers or furniture, for instance — the distinction between real and personal property is obvious. But often the line between the two is less clear. Items that appear to be part of a building may in fact be personal property, like removable wall and floor coverings, removable partitions, awnings and canopies, window treatments, signs and decorative lighting.

In addition, certain items that otherwise would be treated as real property may qualify as personal property if they serve more of a business function than a structural purpose. This includes reinforced flooring to support heavy manufacturing equipment, electrical or plumbing installations required to operate specialized equipment, or dedicated cooling systems for data processing rooms.

A cost segregation study combines accounting and engineering techniques to identify building costs that are properly allocable to tangible personal property rather than real property. Although the relative costs and benefits of a cost segregation study depend on your particular facts and circumstances, it can be a valuable investment.

Depreciation break enhancements

Last year’s TCJA enhances certain depreciation-related tax breaks, which may also enhance the benefits of a cost segregation study. Among other things, the act permanently increased limits on Section 179 expensing. Sec. 179 allows you to immediately deduct the entire cost of qualifying equipment or other fixed assets up to specified thresholds.

The TCJA also expanded 15-year-property treatment to apply to qualified improvement property. Previously this break was limited to qualified leasehold-improvement, retail-improvement and restaurant property. And it temporarily increased first-year bonus depreciation to 100% (from 50%).

Assess the potential savings

Cost segregation studies may yield substantial benefits, but they’re not right for every business. To find out whether a study would be worthwhile for yours, contact us for help assessing the potential tax savings.

© 2018